Finish Thompson PFS 162858 & lower - Manual (Page 3)

Introduction
This manual pertains to the PF Series, specifically the PFS stainless steel drum pump. Finish Thompson Inc. thanks
you for choosing our products. We believe the use of our products will be fully satisfactory. When properly installed
and operated, your Finish Thompson motor and pump will provide long, trouble-free service; therefore, please read
this manual carefully before carrying out any operations on the pump/motor unit. Any use other than that described
herein is considered incorrect; and, consequently, Finish Thompson Inc. shall not be held responsible for any dam-
ages to people or property. In case of doubt or enquiries, please reply to our Technical Service department directly at
the following address:
Finish Thompson, Inc.
921 Greengarden Rd.
Erie, PA 16501 U.S.A.
Tel. 1-814-455-4478; Fax 1-814-455-8518
www.finishthompson.com; [email protected]
Index
Introduction ............................................................................................................................. 1
Pump Specifications ................................................................................................................ 1
Warranty, General Terms & Conditions ...................................................................................... 2
Safety ...................................................................................................................................... 3
Installation ............................................................................................................................... 4
Maintenance
Disassembly ....................................................................................................................... 4
Inspection ........................................................................................................................... 4
Reassembly ........................................................................................................................ 5
Exploded View ......................................................................................................................... 6
Pump Tube Spare Parts List ..................................................................................................... 7-8
Technical Service Hotlne: 1-800-888-3743 or email [email protected]
1
PUMP SPECIFICATIONS
MODEL PFS
Outer Tube Diameter 2” (51 mm)
Discharge Type 1” hose barb
Max. Specific Gravity 1.83
Max. Viscosity 2000 cP
Min./ Max. Fluid
Temperature -20°F (5° F with Perlast o-rings) Min. to 220° F Max.
[-4° C (21° C) Min. to 105° C Max.]
Wetted Materials 316 Stainless Steel, FKM, PTFE, ETFE