Fairbanks 9101 FB Omnicell - Manual (Page 8)

Section 1: General Information
09/07 8 51172 Revision 1
SPECIFICATIONS
Capacities 50, 75, 100, 150, 250, 500, 1,000 and 2,500 lbs.
Mount Construction
• Stainless steel Base Plate
• Reinforced Neoprene Top Plate
Full Scale Output (FSO) 3.0mV/v ± 0.25%
Combined Error (FSO)
≤ 0.03%
Non-Linearity (FSO)
≤ 0.03%
Hysteresis (FSO) ≤ 0.02%
Creep Error (20 min.) ≤ 0.03%
Compensated Temperature 14° to 104° F (-10° C to 40° C)
Operating Temperature -4° to 140° F (-20° – 60° C)
Excitation Voltage
5-15 VDC
Mechanical Overload
• Safe = 150% • Ultimate = 300%
Side-load Safe = 100%
Reject Ratio 500:1
Bridge Resistance 350 ohms nominal
Load Cell Construction
• Stainless Steel 17-4 PH (50-250 Capacity)
• Alloy Tool Steel (500-2,500 Capacity)
Cable 20 ft. Polyurethane
Protection IP 66
Approvals
• Factory Mutual Approved
• NTEP CC #07-009 – Capacities 500 lbs. and greater
Omnicell9101 FB Bending Beam design with
capacities equal to or less than 250 pounds
Omnicell9101 FB Shear Beam design with
capacities greater than 250 pounds