Fairbanks 9101 FB Omnicell - Manual (Page 11)

Section 2: Installation
09/07 11 51172 Revision 1
User’s Responsibilities
1. All electronic and mechanical calibrations and or adjustments required for making
this equipment perform to accuracy and operational specifications are considered
to be part of the installation.
─ They are included in the installation charge.
─ Only those charges which are incurred as a result of the equipment's inability
to be adjusted or calibrated to performance specifications may be charged to
warranty.
2. Absolutely no physical, electrical or program modifications other than selection of
standard options and accessories are to be made to this equipment.
─ Electrical connections other than those specified may not be performed, and
physical alterations (holes, etc.) are not allowed.
3. The equipment consists of printed circuit assemblies which must be handled
using ESD handling procedures
, and must be replaced as units.
─ Replacement of individual
components is not allowed.
─ The assemblies must be properly
packaged in ESD protective material
and returned intact for replacement
credit per normal procedures.