Fairbanks 9101 FB Omnicell - Manual (Page 13)

Section 2: Installation
09/07 13 51172 Revision 1
Load Cell Placement
Follow these guidelines for installing
Omnicell
®
Load Cells.
1. The loading points of the modules should be as
far from one another as the structure allows.
2. When installing the square and rectangle
Omnicell units, line up the Base Plates of the
Load Cells with each other, and align them
evenly from the end and the sides of the units.
3. When installing six Load Cells (Figure 5), be
extremely careful to position the center
Omnicells ® to exactly the same height as the
outer Omnicells ® .