Fairbanks 4000 SERIES Pallet Weigh - Manual (Page 17)

Section 4: Operation
05/12 17 51285 Rev. 1
4.4.5. Summation Operation
Summing Loads
1. Load the scale.
2. Press the key to begin the summation operation.
3. The display will begin flashing a memory number, --01-, and store the weight.
4. Unload the scale.
5. Load the scale again.
6. Press the key to add the weight to the first weighment.
7. The display will begin flashing a memory number, --02-, and store the new
weight and indicate the summed weight on the display.
8. Repeat the process until the summation of loads is complete.
View Summation Total
1. Press and hold the key for three (3) seconds.
2. The display will flash the last memory number used, i.e. –02-, and display the
Total weight summed together. The instrument will return to normal weighing
after approximately five (5) seconds.
Summation Total Reset/ Clear
1. Press and hold the key for three (3) seconds.
2. The display will flash the last memory number used, i.e. –02-, and display the
Total weight summed together.
3. Press the key again.
4. The display will flash, –00-, and display 00.
5. All summed registers are reset to zero (0) and cleared.