Fairbanks 4000 SERIES Pallet Weigh - Manual (Page 11)

Section 2: General Policies
05/12 11 51285 Rev. 1
11. Do not use the weighing system in potentially explosive areas.
12. Do not carry passengers with the truck.
13. Do not weld or make changes to the weighing system without consulting the
Fairbanks Scales.
14. Do not lift unstable loads.
15. Check the accuracy of the scale on a regular basis to prevent faulty readings.
16. Only trained and authorized personnel are allowed to operate the truck.
17. Always follow the operating, maintenance and repair instructions of this truck and
ask the supplier when in doubt.
18. Never lower loads if you are unsure you can place the goods on a stable surface.
Personal injury may result from placement on an unstable environment.
19. Always remain with the scale during dosing applications. Incorrect lifting of the
pallet can cause overflowing.
20. Fairbanks Scales is not responsible for errors that occur due to incorrect weighing
or inaccurate scales.