Fairbanks 4000 SERIES Pallet Weigh - Manual (Page 13)

Section 3: Installation
05/12 13 51285 Rev. 1
3.2. INSTALLING THE BATTERIES
The power supply to the system takes place through 4 AA batteries. When used
normally, the batteries will last for about 1 year. When the voltage level of the
batteries is running low, the display will show “LO-BA“. When the batteries are
completely discharged, the weighing system shuts down.
To install/ replace the batteries:
Remove the screws and then
the indicator cover Remove the battery holder Remove the batteries from the
holder
Place the new batteries in the
battery holder Click the battery holder back
into place Screw the indicator cover back
onto the indicator