Fairbanks 4100 SERIES Pallet Weigh Plus - Manual (Page 18)

Section 4: Operation
10/13 18 51287 Rev. 2
16. When the system is unloaded, the display indicates the negative value of the
tare.
17. The entered value remains active until a new tare weight is entered (display
shows the new net weight).
18. Press the key to return to gross weighing mode.
Note:
The scale must be at a zero condition to enter a manual tare.
4.4.5. Automatic Tare Entry
The indicator offers the possibility to reset tare weights to zero automatically.
1. Lift load.
2. Press the key.
3. The indicator is set to zero.
4. The “NET” pointer shows that a tare weight is activated.
5. Place or remove the net load.
6. The display shows the net value of the weighed load.
7. When removing load, this is a negative value.
8. By pressing the key again, the gross weight is displayed.
4.4.6. ID Code Entry
The indicator offers the possibility to enter 1 numeric ID code of 5 digits. Entry of ID
codes is useful when the weighing system is connected to a printer or other
peripheral equipment, in order to identify various weighments during processing of
the information.
1. Press the key for 3 seconds.
2. The display will show the last used code.
3. The right digit flashing.