Fairbanks FB3000 Inbound/Outbound Program Operators Manual - Manual (Page 32)

Section 4: Operation
09/07 32 51149 Rev. 1
IN/OUT Weighing, Continued
Using a Stored Tare
After finding the tare amount is completed,
the same truck can then return later with
another full load, and be weighed using the
previously stored tare amount.
12. After entering the scale, the drivers
gives the operator the same LOOP ID
as before.
─ The previous tare amount is used.
13. The truck leaves and empties its load,
then can return later for an unlimited
number of weighments, giving the
operator the same
LOOP ID .
Once the vehicle has a LOOP ID , it can repeat the load, unload, weighing process without needing
to calculate the tare amount again.