Fairbanks FB3000 Inbound/Outbound Program Operators Manual - Manual (Page 30)

Section 4: Operation
09/07 30 51149 Rev. 1
IN/OUT Weighing
1. Press the ZERO button on the Weigh
Screen Keypad.
2. Drive the vehicle onto the scale.
─ This is the INBOUND Weighment.
3. Press the F2 (INBOUND) button.
─ The display prompts the operator for
a
LOOP ID.
─ This is the identification number for
the transaction.
4. Enter the vehicle ID number, using
the Weight Screen Keypad.
─ This number can be a license plate,
company registration ID, the truck
number, etc, whichever is correct for
the company’s specific application.
5. Press the ENTER button.
─ The LOOP ID Number is used again
to recall the Outbound Weighment.
─ An INBOUND Ticket is printed if the
INBOUND Ticket Format
is
programmed for this function.
─ Data for this partial transaction is
stored in the indicator with the LOOP
ID number
as the Transaction
Recall Label .
An Inbound Weighment can be either a full or empty load.