Fairbanks 27135 TeleWeigh with Bluetooth - Manual (Page 16)

Section 5: Service & Maintenance
08/07 16 51166 Revision 1
Scale Maintenance
Installing Batteries
1. To install the four (4) AA Batteries, lift the
battery cover.
2. Match the correct poles and insert two
batteries in one direction, then two in the
other direction.
3. Replace the battery cover.
Finding the Best Location
•
Place the scale on a flat, solid, level floor.
•
When the scale is to be used with a remote Bluetooth
®
device the scale location
must be within radio range of the remote device. Follow the Remote Device’s
setup procedure to confirm communication between the scale and the Remote
Device.
•
Keep the scale in a location completely away from all high water, such as low-
lying areas that may flood, and away from any drain pipes.
Cleaning the Scale
•
Use a moist cotton cloth to clean the scale.
−
If spray cleaner is needed for shoe sole marks, squirt it into the cloth, and not
directly onto the scale.
−
Use only tap water in the cloth to wipe off the scale’s clear plastic display.