Fairbanks 27135 TeleWeigh with Bluetooth - Manual (Page 13)

Section 4: Operation
08/07 13 51166 Revision 1
Manual Zero Operation
The scale may need to be manually
zeroed occasionally. The following
procedure will perform a manual zero of
the scale.
1. While the display is still active (thirty
seconds), press the Zero Button . using
an item such as a straightened paper clip or
toothpick.
•
This is the top hole on the bottom of
the scale near the Mode Switch.
2. Once the switch has been pressed, place the scale on a flat surface where it will
be used.
3. The scale will set itself to zero (0.0) and be ready for use.