Fairbanks 27135 TeleWeigh with Bluetooth - Manual (Page 11)

08/07 11 51166 Revision 1
Section 4: Operation
Modes of Operation
There are two basic modes of operation, Stand Alone Weighing Operations and
Weighing with BlueTooth
®
Communications .
Stand Alone Weighing
Operations
1. On the bottom-side of the scale,
move the switch to the one of
these settings.
▪ lb ( Pounds ) is used for
Avoirdupois Weighments.
▪ kg ( Kilogram ) is used for
Metric Weighments.
2. Once the switch is selected, place
the scale on a flat surface where it
will be used.
3. Stand on the scale. This will activate the scale.
4. The scale will beep once to indicate it has started a measurement cycle and
start displaying the weight.
5. Once the weight is stable, the scale will beep twice, indicating the weight has
been captured and the display will show the captured weight.
6. Step off the scale. The displayed weight is held on the display for about ten
(10) seconds.
7. After the ten (10) seconds, the scale will briefly try to re-zero itself for the next
weighment, provided there is less than ten (10) pounds on scale.
8. The scale will turn off and the weighing process is complete..