Fairbanks 27135 TeleWeigh with Bluetooth - Manual (Page 14)

08/07 14 51166 Revision 1
Section 5: Service & Maintenance
Scale Error Codes
There a several error conditions and operational steps indicated by the scale.
•
Not all are applicable in every sequence.
•
Some errors are indicated using audible beeps and some are shown on the scale
display.
LCD Display Indications
Displayed Text or Annunciator Description
The scale is initializing its hardware
All LCD Segments ON Hardware test to check for a malfunctioning display.
Scale battery requires changing
Motion/Stable Annunciator Weight is stable on the scale
Lb Annunciator Displayed weight is in pounds
Kg Annunciator Displayed weight is in kilograms
Weight Under Capacity
- Weight Over Capacity
Inquiry process done successfully. This is a Setup Function
display value.
Inquiry process found no Remote Device to connect with
This is a Setup Function display value .
Calibration sequence successful
Error in Calibration sequence
Inquiry taking place
Indicates no Remote Device was found during a Bluetooth
Measurement Cycle
7 Short chirps at five (5) second intervals for thirty (30)
seconds. Weight is left on scale, and
On switch contact
closed.