Fairbanks Series III Bench Scales - Manual (Page 13)

50778 13 07/10 -- Rev. 6
A. Error message(s)
Symptom Cause Solution
Over load :
* Weighing range exceed
> Unload scale or reduce preload
Underload :
* Weighing pan not in place
> Ensure the weighing pan is
correctly installed and surrounding
parts are not touching
* Weighing range below zero > Set scale to zero
* Contact between weighing > Apply pre-load
Zeroing not possible : > Ensure that zeroing is performed
in the admissible range
Low Battery Condition > Plug AC/DC adapter to scale to
* Below 5.5Vdc allow the battery to recharge.
Section 6: Service and Maintenance