Asus DSEB-DG/SAS - Manual (Page 144)

5-38 Chapter 5: RAID configuration
5.3.7 Exiting the Intel ® Matrix Storage Manager
To exit the utility:
1. From the utility main menu, select 4. Exit, then press .
This window appears.
Are you sure you want to exit? (Y/N):
[ CONFIRM EXIT ]
2. Press to exit or press to return to the utility main menu.
5.3.6 Resetting disks to Non-RAID
Take caution before you reset a RAID volume hard disk drive to non-RAID.
Resetting a RAID volume hard disk drive deletes all internal RAID structure on
the drive.
To reset a RAID set hard disk drive:
1. From the utility main menu, select 3. Reset Disks to Non-RAID, then press
to display this screen.
2. Use the up/down arrow key to highlight the RAID set drive you want to reset,
then press to select.
3. Press to reset the RAID set drive. A confirmation message appears.
4. Press to reset the drive or press to return to the utility main menu.
5. Follow steps 2 to 4 to select and reset other RAID set drives.
[ RESET RAID DATA ]
Resetting RAID data will remove internal RAID structures
from the selected RAID disks. By removing these structures,
the drive will revert back to a non-RAID disk.
WARNING: Resetting a disk causes all data on the disk to
be lost.
Port Drive Model Serial # Size Status
0 XXXXXXXXXXXX XXXXXXXX XX.XGB Member Disk
1 XXXXXXXXXXXX XXXXXXXX XX.XGB Member Disk
Select the disks that should be reset.
[↑↓]-Previous/Next [SPACE]-Selects [ENTER]-Selection Complete