Asus DSEB-DG/SAS - Manual (Page 101)

ASUS DSEB-DG Series 4-33
4.7.2 Boot Settings Configuration
Quick Boot [Enabled]
Enabling this item allows the BIOS to skip some power on self tests (POST) while
booting to decrease the time needed to boot the system. When set to [Disabled],
BIOS performs all the POST items.
Configuration options: [Disabled] [Enabled]
Full Logo Display [Disabled]
Allows you to enable or disable the full screen logo display feature.
Configuration options: [Disabled] [Enabled]
Set this item to [Enabled] to use the ASUS MyLogo2™ feature.
Bootup Num-Lock [On]
Allows you to select the power-on state for the NumLock.
Configuration options: [Off] [On]
PS/2 Mouse Support [Auto]
Allows you to enable or disable support for PS/2 mouse.
Configuration options: [Disabled] [Enabled] [Auto]
Parity Check [Disabled]
Allows you to enable or disable the memory or paraity error check.
Configuration options: [Disabled] [Enabled]
POST Errors [Disabled]
When set to [Enabled], the system waits for the key to be pressed when error
occurs. Configuration options: [Disabled] [Enabled]
Setup Prompt [Enabled]
When set to [Enabled], the system displays the message “Press DEL to run Setup”
during POST. Configuration options: [Disabled] [Enabled]
V02.61 (C)Copyright 1985-2006, American Megatrends, Inc.
BIOS SETUP UTILITY
Boot
Boot Settings Configuration
Quick Boot [Enabled]
Full Logo Display [Disabled]
Bootup Num-Lock [On]
PS/2 Mouse Support [Auto]
Parity Check [Disabled]
POST Errors [Disabled]
Setup Prompt [Enabled]
Interrupt 19 Capture [Enabled]
←→ Select Screen
↑↓ Select Item
+- Change Field
F1 General Help
F10 Save and Exit
ESC Exit
Allows BIOS to skip
certain tests while
booting. This will
decrease the time
needed to boot the
system.