FEC AFC1150 - Manual (Page 15)

)(& ,QF
This set-up must not be changed.
Fig. 4.6.2
4.6.3 JP1 Set-Up
Set-up the jumpers for tool model and servo type.
L H L H DRT-302M3-S/O
L H L H DRT-202M3-S/O
L H L H DRT152M3-S
L H L H DRT-132M3-S/O
L H L H DRT-801M3-S/O
L H L H DRT-601M3-S
AXIS-005A
(M3 Tool Models)
L L H H DRT-401M2-S/O
L H H H DRT-401M1-S/O
L L H H DRT-201M2-S
L H H H DRT-201M1-S/O
L H H H DRT-101M1-S/O
L H H H DRT-101M1-S1/O1
AXIS-003A
(M1 and M2
Tool Models)
A B C D TOOL MODEL SERVO TYPE
Fig. 4.6.3
L
H
D C B A
4.6.4 JP2 set-up
Select the motor direction.
CHAPTER 4: INSTALLATION AND WIRING
Page 4 - 15
S3
D
A
C SP