Emtech Electronics BLU-CIF2 - Manual (Page 4)

4
BLU-CC1A & CC2A/SV5 BLU-CC1B & CC2B/SV6
1. Power Button (IN5) 1. Volume (IN6)
2. Volume (IN7) 2. Volume (IN8)
3. Ref 3. Ref
4. N/A 4. N/A
5. VCC 5. N/A (CC1B) or VCC (CC2B/SV6)
6. LED (OUT3) 6. LED (OUT4)
7. GND 7. N/A
8. GND 8. N/A
BLU-SV2 & SV4
BLU-SV7
1. SRC (IN10) 1. SRC (IN11)
2. Volume (IN9) 2. Volume (IN12)
3. Ref 3. Ref
4. N/A 4. N/A
5. VCC 5. VCC
6. N/A 6. N/A
7. GND 7. GND
8. GND 8. GND
A remote control can be used for controlling the volume of the various
microphone inputs in the cultural hall. When wiring for a remote application
wire to IN5 thru IN9, Ref and GND on CC1A, CC1B and SV2.
BLU-CIF2 / MSC-C Wiring Instructions
Some existing buildings already use Emtech
MSC-C modules to provide chapel audio for the
cultural hall and overflow areas. The BLU-CIF2
is designed to allow these existing modules to
interface with the BSS Audio DSP. Located
through the middle section of the CIF Board are
three 4-pin euro-style connectors. Each
connector has identification and wiring
designations silkscreened below it.