Teledyne PEM-9002 - Digital flue gas analyzer - Manual (Page 31)

26
Case 1: No memory blocks created.
NewFile
Create new memory block
S1
Creates a memory block with additional data (e.g.
type of combustion plant, customer address etc.)
see Section 6.6.4.2, page 29.
Return Confirm memory block generation.
S3
Calls up the next memory menu
Save Stores measured values
S3
No Files
are existend
New file Edit. text Return
Memory block (without
customer data) is created
Measurement is stored in the
previously generated memory block.