Teledyne OT-2 - Oxygen transmitter system - Manual (Page 6)

Teledyne Analytical Instruments
1 Introduction Model OT-2 System
1-2
• Accurate (±2% of full scale at constant temperature on
100 ppm, or 1000 ppm scale; ±1 ppm on 0–10 ppm scale
at constant temperature)
• Insensitive to flow variations
• Fast response and recovery
• Long life, maintenance-free Micro-Fuel Cell oxygen
sensor
• Unaffected by reducing agents (HC's, CO, SO
2
, etc.)
• Easy to calibrate, no zero gas required
• 12VDC Battery Powered w/ 1-5 VDC Output
• Rugged NEMA 4, bulkhead mounted enclosure
• Stainless Steel sample system (nylon cell holder)
• H
2
S scrubber
• Pressure regulation with gage
• Sample filter
• Flowmeter
• Heated cell holder assembly
1.3 Typical Applications
Although the OT-2 System is designed in conjunction with the
Elsag Baily Total Flow TM System for natural gas production, it also is
capable of monitoring oxygen at the ppm level in a variety of
gases. A few typical applications include:
• Gas gathering and transportation
• Monitoring inert gas blanketing
• Air separation and liquefaction
• Chemical feedstock analysis
• Petrochemical process control
• Heat treating and bright annealing processes
• Quality assurance
• Gas certification
• Welding applications