Teledyne 3300TB - Low cost trace oxygen analyzer User Manual
Page 7
1-1
Trace Oxygen Analyzer
Introduction 1
Teledyne Analytical Instruments
Introduction
1.1
Overview
The Teledyne Electronic Technologies Analytical Instruments (TET/AI)
Model 3300TB is a microprocessor-based trace oxygen analyzer for real-time
measurement of the parts per million of oxygen in inert gases, or in a wide variety
of gas mixtures. It features simple operation, fast response, and a compact,
rugged construction. Typical applications of the Model 3300TB are monitoring
nitrogen generators and inert gas blanketing applications.
1.2
Main Features of the Analyzer
The main features of the analyzer include:
•
High resolution, accurate readings of oxygen content from 0-10ppm
through 9999ppm Large, bright, LED meter readout.
•
Simple pushbutton controls.
•
Nylon cell holder.
•
Advanced Micro-Fuel Cell, for trace analysis, has six months
warranty and an expected lifetime of eight months.
•
Unaffected by oxidizable gases.
•
Fast response and recovery time.
•
Microprocessor based electronics: 8-bit CMOS microprocessor
with on-board RAM and 16 KB ROM.
•
Two user selectable ranges (from 0-10 ppm through 0-9999 ppm)
allow best match to users process and equipment.
•
Operator can select Autoranging, which allows the analyzer to
automatically select the proper preset range for a given
measurement, or he can lock the analyzer onto a single range.
•
Two concentration alarms with adjustable setpoints.
•
Panel mount flowmeter.
•
Control valve for the selection of Span gas or Sample gas.
•
Sensor failure alarm.