beautypg.com

Teledyne 3300TB - Low cost trace oxygen analyzer User Manual

Page 23

background image

3-7

Trace Oxygen Analyzer

Installation 3

Teledyne Analytical Instruments

3.5

Installation Checklist

Before connecting the instrument to the power source and turning it on,

make sure you have:

Correctly installed the Sample and Exhaust gas lines

Checked for leaks

Set the sample pressure to 5–10 psig (34.5 - 68.9 kPa), nominal
(for non-vacuum service units)

Set the flow

Once the above checks have been made, you can connect to the power

source. The instrument is now ready for operation.