Teledyne 3110 – Portable Trace/Percent Oxygen Analyzer, unapproved version - Manual (Page 27)

Portable Trace Oxygen Analyzer Operation
Teledyne Analytical Instruments 27
3.2.1 POWER ON Screen
The POWER ON screen automatically appears on the display when
the unit is first powered up. The display appears briefly and shows the
model number and software version. After a few seconds the display
reverts to the HOME screen.
3.2.2 HOME Screen
The HOME screen displays the oxygen concentration at the level of
the current range (ppm or %). The concentration is shown in the upper
line the current range is indicated on the second line.
Note: In almost all of the available screens, the first line displays
the oxygen concentration.
3.2.3 DATE Screen
Use the UP/DOWN keys to navigate to the DATE screen. The
second line of the DATE screen displays the current date and is used by
the data logger for date stamping data records. The currently set date is
displayed on the second line of the display.
To change the currently set date:
1. Press ENTER to enter the date setup function. Note the
navigation arrows that appear on the left and right sides of
the display change from UP/DOWN to pointing
LEFT/RIGHT.