SPP Pumps Auto Prime Medium Head Open Set - AL Range - Manual (Page 12)

Manual No/Rev
W72-025E / 3
Operators Instructions for
AL100 & 150 Diesel Driven Centrifugal Pumps
Our policy is one of continuous improvement and we reserve the right to alter specifications at any time
Page 12 of 12
9. TECHNICAL DATA
CHARACTERISTICS AL100 & AL100M AL150 & AL150M
Vacuum Pump 25 cfm 60 cfm
Solids Handling Capability 44mm Dia. 50mm Dia.
Engine Type Isuzu 3CD1 Water cooled Isuzu 4LE1 Water cooled
Fuel Tank Capacity 76 Litres
Approx. Running Time On Full Tank 22 Hours
Impeller Back Plate Clearance 0.30 to 0.60 mm 0.012 to 0.024"
Impeller Front Plate Clearance 0.40 to 0.60 mm 0.015 - 0.024"
Mechanical Seal Coolant/Lubricant Mobil Velocite Oil No. 6, Texaco Rando HD10 Or equivalent
Bearing Lubricant
Grease: Texaco Multifak All Purpose EP2 or equivalent to DIN 51825:
KP2\K-30
Vacuum Pump Oil
above 30
0
C
Texaco Regular Motor oil 30 or equivalents conforming to API CC
5F, CCMC G2.D1, MIL-L-2104B or MIL-L-46152B *
below 30 0 C
Texaco Ursatex 10W-30 or equivalents conforming to API CC 5F,
CCMC G2.D1, MIL-L-2104B or MIL-L-46152B *
Weight Dry (No fuel in tank) 900 Kg
Weight (With full fuel tank) 970 Kg
1463mm 1900mm 750mm
1
3
7
7
m
m
AL100 & 100M OVERALL DIMENSIONS
Note - These dimensions are approximate and may vary to suit the selected customer options.
10. SPARES & SERVICE
SPP Pumps operate a comprehensive Spares and Service support network throughout the world, and
can be contacted as follows:
SPARES & SERVICE Telephone: +44 (0)1189 323 123
For spare parts, supply only. Ask for - Spares Dept.
For breakdowns, spare parts and on-site fitting, pump installation and
commissioning, and service contracts.
Ask for - Service Dept.
For breakdowns outside office hours. Telephone : +44 (0)1189 323 123
Spares & Service Office
SPP Pumps Limited
General Fax line: +44 (0)1189 323 302
Theale Cross
Reading, Berkshire
Direct Fax line: +44 (0)1189 303 259
RG31 7SP
ENGLAND
Copies of this manual are available from the SPP Pumps Limited Spares & Service Department by
quoting the manual reference number and the relevant revision number.
11. ENGINE OPERATORS HANDBOOK
The specific engine operator’s handbook from the manufacturer is included within the pump
documentation pack.