SPP Pumps Split Case Pumps - Manual (Page 2)

Manual No/Rev
W00-002E / 4
Pump Installation Guide
Our policy is one of continuous improvement and we reserve the right to alter specifications without giving notice.
Page 2 of 12
General Safety Instructions
The products supplied by SPP Pumps Limited have been designed with safety in
mind. Where hazards cannot be eliminated, the risk has been minimised by the
use of guards and other design features. Some hazards cannot be guarded
against and the instructions below MUST BE COMPLIED WITH for safe operation.
These instructions cannot cover all circumstances, YOU are responsible for using
safe working practices at all times.
1 SPP Pumps products are designed for installation in designated areas, which are to
be kept clean and free of obstructions that may restrict safe access to the controls
and maintenance access points.
2 Access to the equipment should be restricted to the personnel responsible for
installation, operation and maintenance and they must be trained, adequately
qualified and supplied with the appropriate tools for their respective tasks.
3 SPP Pumps Limited requires that all personnel that are responsible for installation,
operation or maintenance of the equipment, have access to and study the product
instruction manual BEFORE any work is done and that they will comply with all local
and industry based safety instructions and regulations.
4 Ear defenders should be worn where the specified equipment noise level exceeds
locally defined safe levels. Safety glasses or goggles should be worn where
working with pressurised systems and hazardous substances. Other personal
protection equipment must be worn where local rules apply.
5 Do NOT wear loose or frayed clothing or jewellery that could catch on the controls
or become trapped in the equipment.
6 Read the instruction manual before installation, operation or maintenance of the
equipment. Check and confirm that the correct instruction manual is being used by
comparing the serial number on the equipment with the documentation.
7 Refer to the data plates on the equipment supplied, operation of the equipment
outside these specifications will increase the risk to operators and may lead to
premature and hazardous pump failure.
8 IMPROPER INSTALLATION, OPERATION OR MAINTENANCE OF THIS SPP
PUMPS PRODUCT COULD RESULT IN INJURY OR DEATH.
9 Within the manual, safety instructions are marked with safety symbols.
Hazard
This symbol refers to general mechanical
aspects of safety.
Hazard
This symbol refers to electrical safety.
This symbol gives warning of a hazard to the
pump itself, which in turn, could cause a risk to
personal safety.
ATTENTION