Asus P4T-E - Manual (Page 37)

ASUS P4T-E User’s Manual 37
3. HARDWARE SETUP
Connectors
3. H/W SETUP
11) USB Headers (10-1 pin USB2)
If the USB Ports on the back panels are inadequate, a USB header is available
for two additional USB ports. Connect the 10-1 pin ribbon cable from the pro-
vided 2-port USB connector set to the midboard 10-1 pin USB header and mount
the USB connector set to an open slot on your chassis.
P4T-E
P4T-E USB Headers
USB2
1 5
6 10
1: USB Power
2: USBP2–
3: USBP2+
4: GND
5: NC 6: USB Power
7: USBP3–
8: USBP3+
9: GND
12) Internal Audio Connectors (4-pin MODEM, CD_IN, AUX)
These connectors allow you to receive stereo audio input from such audio-vi-
sual sources as a CD-ROM input, or MPEG card.
P4T-E
P4T-E Internal Audio Connectors
MODEM
Modem-Out
Ground
Modem-In
Ground
Right Audio Channel
Left Audio Channel
Ground
Ground
CD1 (Black)
AUX (White)