Asus P4T-E - Manual (Page 18)

18 ASUS P4T-E User’s Manual
3. HARDWARE SETUP
P4T-E
P4T-E DIP Switches
1. Frequency Multiple
2. Frequency Multiple
3. Frequency Multiple
4. Frequency Multiple
5. Reserved
6. Frequency Selection
7. Frequency Selection
8. Frequency Selection
9. Frequency Selection
10. Frequency Selection
OFF
ON
1 2 3 4 5 6 7 8 9 10
ON
SW1
P4T-E
Jumper Mode
1 2
P4T-E JumperFree™ Mode Setting
ON
1 2 3 4 5 6 7 8 9 10
JEN
Jumper Free
(Default)
2 3
SW1
OFF
Motherboard Frequency Settings (SW1 Switches)
The motherboard frequency is adjusted through the DIP switches. The white block
represents the switch’s position. The illustration below shows all the switches in the
OFF position.
1) JumperFree™ Mode (JEN)
This jumper allows you to enable or disable the JumperFree ™ mode. The
JumperFree ™ mode allows processor settings to be made through the BIOS setup
(see 4.4 Advanced Menu).
Setting JEN
Enable (JumperFree) [2-3] (default)
Disable (Jumper Mode) [1-2]
Motherboard Settings
3. H/W SETUP