Asus P4T-E - Manual (Page 20)

20 ASUS P4T-E User’s Manual
3. HARDWARE SETUP
Motherboard Settings
3. H/W SETUP
P4T-E
P4T-E CPU Frequency
Multiple Selection
SW1
8.0x 10.0x 11.0x 12.0x
ON
1 2 3 4 5 6 7 8 9 10
ON
1 2 3 4 5 6 7 8 9 10
ON
1 2 3 4 5 6 7 8 9 10
ON
1 2 3 4 5 6 7 8 9 10
13.0x 14.0x 15.0x 16.0x
ON
1 2 3 4 5 6 7 8 9 10
ON
1 2 3 4 5 6 7 8 9 10
ON
1 2 3 4 5 6 7 8 9 10
ON
1 2 3 4 5 6 7 8 9 10
17.0x 18.0x 19.0x 20.0x
ON
1 2 3 4 5 6 7 8 9 10
ON
1 2 3 4 5 6 7 8 9 10
ON
1 2 3 4 5 6 7 8 9 10
ON
1 2 3 4 5 6 7 8 9 10
21.0x 22.0x 23.0x 24.0x
ON
1 2 3 4 5 6 7 8 9 10
ON
1 2 3 4 5 6 7 8 9 10
ON
1 2 3 4 5 6 7 8 9 10
ON
1 2 3 4 5 6 7 8 9 10
3) Manual CPU Ratio Settings (SW1 Switches 1-4)
Set SW1 switches (7-10) to use the clock multiplier to coordinate the ratio of
bus speeds with CPU settings. Set the DSW switches according to the internal
speed of your processor and the bus frequency.
IMPORTANT:
1. To use this feature, JEN must be set to Jumper Mode, [1-2].
(See 1, JumperFree™ Mode (JEN) in 3, HARDWARE SETUP.)
2. When JumperFree mode is enabled, use BIOS setup in place of these switches.
(Set Operating Frequency Setting to User Define under 4.4 Advanced Menu
in BIOS Setup so you can set the CPU Frequency.)
Multiplier 1 2 3 4
8.0x [OFF] [OFF] [OFF] [OFF]
10.0x [ON] [OFF] [OFF] [OFF]
11.0x [OFF] [ON] [OFF] [OFF]
12.0x [ON] [ON] [OFF] [OFF]
13.0x [OFF] [OFF] [ON] [OFF]
14.0x [ON] [OFF] [ON] [OFF]
15.0x [OFF] [ON] [ON] [OFF]
16.0x [ON] [ON] [ON] [OFF]
17.0x [OFF] [OFF] [OFF] [ON]
18.0x [ON] [OFF] [OFF] [ON]
19.0x [OFF] [ON] [OFF] [ON]
20.0x [ON] [ON] [OFF] [ON]
21.0x [OFF] [OFF] [ON] [ON]
22.0x [ON] [OFF] [ON] [ON]
23.0x [OFF] [ON] [ON] [ON]
24.0x [ON] [ON] [ON] [ON]
CPU Ratio Multiplier Table