Approach Tech DVR-3704T - Manual (Page 35)

7.2 CONNECTION TESTING
As with the previous settings, follow the instructions below to ensure you have established the connection
successfully.
1. Click Start Command Programs
2. Type in ping 192.168.1.1, then Enter. (See the sample screen below.)
** This IP is the DVR IP address that is assigned for the connected DVR.
3.If you receive a response as in the sample screen below, the connection hasn’t been successfully
established. Please re-check all the hardware and software installations by repeating steps 1 to 5. If you
still can’t establish the connection after rechecking, please contact your dealer.
4. If you receive a response as in the sample screen below, you have successfully made the connection.
33