Approach Tech DVR-3704T - Manual (Page 24)

5.5 ADVANCED SETTING
This page includes multiple special functions.
MAIN MENU ADVANCED SETTING
1 QUICK SETTING ENTER 1.RECORD SETTING ENTER
2 DISPLAY OPTION ENTER 2.ALARM SETTING ENTER
3.SEQUENCE SETTING ENTER 3.MOTION SETTING ENTER
4.PICTURE ADJUST ENTER 4.NETWORK SETTING ENTER
5.ADVANCED SETTING ENTER 5.SCHEDULE SETTING ENTER
6.DISK SETUP ENTER
7.SYSTEM SETTING ENTER
5.5.1 RECORD SETTING
This page enables you to set the recording rate, recording quality, and resolution, and enables you
to activate the rewrite function and set the audio.
ADVANCED SETTING RECORD SETTING
1.RECORD SETTING ENTER 1.RECORD RATE 30 F/S
2.ALARM SETTING ENTER 2.RECORD QUALITY BASIC
3.MOTION SETTING ENTER 3.RESOLUTION 720 X 240
4.NETWORK SETTING ENTER 4.DISK FULL REWRITE
5.SCHEDULE SETTING ENTER 5.AUDIO ON
1. RECORD RATE:
Select this item and use the “^” and ”v” buttons to adjust your recording rate out of our available
rates of 1, 2, 3, 5, 10, 15, 30 and 60 (NTSC), or 1, 2, 3, 5, 8, 12, 25 and 50 (PAL).
2. RECORD QUALITY:
You can choose quality at 4 different levels of recording images from "BASIC","STANDARD" and
"HIGH" to "BEST".
3. RESOLUTION :
This option determines the resolution of recording. The resolution is 720 x 240 pixels or 360 x 240
pixels (NTSC) and 720 x 288 pixels or 360 x 288 pixels (PAL).
Note: When the
RESOLUTION is set in the 360 x 240 (360 x 288) pixels, the RECORD RATE will
be fixed in 120 F/S (NTSC) and 100 F/S (PAL) and cannot be changed.
4. DISK FULL:
This option determines the way to utilize storage media in case of a full disk.
REWRITE: When the hard disk is full, the device continues recording by displacing the old data.
STOP: When the hard disk is full, the device will stop recording.
22