Audiovox FLO TV DFL710 - Manual (Page 9)

8
Unpacking the unit
• 1 x Audiovox 7” Portable DVD Player with FLO TV™
• 1 x Audio/Video Cable
• 1 x AC to DC Adapter
• 1 x DC Power Adapter
• 1 x Remote Control with battery (CR2025)*
• 1 x Carrying Bag*
• 2 x Foldable Headphones*
• 1 x Instruction Manual
• 1 x Quick Start Guide
• 1 x Product Registration Card
• 1 x eMusic Card
• 1 x EULA
• 1 x FLO Terms of Service and Software License
• 1 x FLO Activation Insert
* For DFL710PK only
Recharging the built-in battery
1. The DVD player utilizes a long-life Li-Polymer battery for portability. Li-Polymer
batteries feature high storage capacity and low level of degradation. This means
the Li-Polymer batteries do not have “Memory Effect” and thus can be recharged
regardless of whether the battery is fully or only partially discharged. The battery
must be charged at least 8 hours prior to first use.
2. Recharging battery
There are two methods to recharge the battery. Connect the AC to DC adapter to
the unit, and then
A. power off the player. The Charge/Power LED will be red. Once fully charged, the
Charge/Power LED will turn off.
B. power on the player. The Charge/Power LED will be red during charge. Once
fully charged, the Charge/Power LED will be green.
If you plan to not use the battery for an extended period of time (one
week or longer), we recommend that you fully charge the battery. For
longer periods of storage, please recharge the battery at least once
every two months to maintain the battery in optimum condition. Each
full recharge takes approximately five hours.
During playback, an icon
appears on the screen, which means the
battery has low power and you should recharge the built-in battery
now.