Audiovox FLO TV DFL710 - Manual (Page 39)

38
This menu is available from either FLO or DVD mode.
Press and hold SETTINGS button for about two seconds to enter the System Setup
Page. Press or buttons to highlight the desired options and press or to adjust
the values.
1. OSD Language
Select among English, French and Spanish.
2. Airplane Mode (On/Off)
When the Airplane Mode is turned on, “Airplane Mode Enabled” will be displayed
for about three seconds when you try to enter the FLO TV mode. This setting will
be retained even after switched off the main power.
3. Wide (On/Off)
Switch between wide screen and 4:3 picture aspect ratio.
4. Brightness/Contrast/Saturation/Hue
Adjust from -20 to +20. Default value is 0.
5. Reset
Reset to factory default settings. This will reset all saved preferences in the settings
options except the Parental Ratings and the default password.
6. Quit
Select this option to quit the System Setup Page. You can also press the SETTINGS
button or wait for few seconds timeout to quite the System Setup Page.
System Setup Page