Audiovox FLO TV DFL710 - Manual (Page 31)

30
• To repeat a segment between two points (A and B), press REP A-B (on remote
control) at the beginning of the segment you want to repeat. Allow the disc to play
to the end of the segment to the end point (B). Press REP A-B (on remote control)
again at the end of the segment. The segment plays repeatedly until you press REP
A-B (on remote control) to resume normal playback.
Note: Repeat function is only available on remote control.
Angle
Some discs offer different camera angles for specific scenes.
• To change the camera angle, press ANGLE (on remote control) repeatedly to select
the camera angle.
• If the disc was recorded using a single camera angle, this function is not available.
Note: If you want to access the angle function, adjust the setting through Setting
menu before pressing ANGLE on remote control (refer to the General Setup Page
section).