Poweramp EOD DL-NL-TS SERIES - Manual (Page 26)

24 Manual No. 4111-0025
March 2011
May 2012
OPERATION
1. Grasp the captured operating handle and raise to
its full extended length.
2. Move handle toward you, rotating center plate
back past vertical. Lip plate extend link arm will
engage at this time.
3. Push forward on operating handle against the rivet,
rotating leveler out onto truck.
4. Return handle to stored position.
5. To remove leveler from truck repeat step number one
until the lip clears the bed of the trailer. Return leveler and
handle to the stored position. OR When the truck departs,
the unit will automatically return to the stored position.
OPERATING INSTRUCTIONS FOR NL & TS SERIES
RIVET