Poweramp EOD DL-NL-TS SERIES - Manual (Page 15)

13 Manual No. 4111-0025
March 2011
May 2012
NOTE
DESCRIPTION
1
Top of base plate and bumper cover plate to be flush with top of ramp plate.
2
Apply continuous bevel weld across both bumpers
and length of
base plate.
3
To figure ramp plate length, need 12”
ramp for every 1-1/2” of rise
to ramp.
INSTALLATION
Securely block or support ramp and lip when in vertical positions. Lack of proper bracing can result in ramp dropping
during adjustment or installation
causing personal
injury or damage to unit.