Power Probe The Hook - Manual (Page 17)

Page 17
AC Peak to Peak and Frequency are the same function.
• The speaker can only be turned on and off in Power Probe Hook Mode (PPHM).
• The Red and Green LED’s will not detect Voltage Drop unless in Power Probe Hook Mode (PPHM).
• You may have to adjust your Voltage Drop preferences to get the Red/ Green LED’s to work as a Voltage Drop Meter.
• When the 3 wire continuity plug is inserted into the jack, the Red/Green LED’s are now dedicated to the Continuity
Tester. They will respond to either the red or green wire respectively when touched to the black. You can still use the Hook
normally to power up or read voltage, ohms or amps.
• The auxiliary ground has a replaceable 25 amp fuse. Always touch it to the tip for continuity before using it to make sure
the fuse is not blown.
Product Specifications
Min Operating Voltage ..........................12 VDC
Max Operating Voltage .........................48 VDC
Max Operating Temperature .......................50 C
Max Storage Temperature ..........................70 C
Voltage Measurement............ 0-99.9 VDC/ VAC
Ohms Measurement .001 Ohms – 15 Meg Ohms
Amps Measurement .... .001 Amps – 99.9 Amps
Max Continuous Load.......................... 25 Amps
Max Intermittent Load ..........65 Amps for 8 Sec.
Hook Up Cables ................................ 10 Gauge
Specs...
Your Power Probe Hook is warrantied against any defects and workmanship when used normally in accordance with Power
Probe’s published guidelines for a period of 1 year from the date of warranty activation.You have 30 days after purchasing
your Power Probe Hook to activate your warranty. The product is automatically warrantied for the first 30 days. You can
activate your warranty by filling out the warranty card and mailing it in to us. You may also go to our website: powerprobe.
com/warranty/ or scan the QR Code with your mobile device and fill in the required information. You may also register your
warranty by calling us at: (800) 655-3585. Please have your serial number ready and your sales receipt for date of purchase.
The warranty does not cover damage due to moisture or physical abuse. If you fail to activate your warranty within the 30
days, the warranty may be void. If repair is necessary you may be charged a calculated fee to repair it.
When you warranty your product within the 30 days, you will have the option to purchase an extended warranty of 1 year in
addition to your 1 year activated warranty for $79.95.
Removing the back cover VOIDS any warranty
warranty