American Dryer Corp. ML-310 - Manual (Page 26)

22
E. COMPRESSED AIR SUPPLY SYSTEM
A clean, dry, and regulated air supply of 80 PSI (5.51 bars) compressed air must be supplied to the dryer. The
connection size is 1/8-inch N.P.T. No air filtering or pressure regulating devices are provided with the standard
non-tilt dryer. A filter/regulator/gauge (F/R/G) assembly is provided on dryers with the optional automatic loading
doors or the optional sprinkler system.
1. Compressed Air Supply Connection Location For Non-Tilt Dryers Built Without A Sprinkler System OR
Without Automatic Loading Doors
a. Gas Dryers
The air line supply connection is made into the 1/8-inch N.P.T. port on the air jet solenoid valve which is
located in the base of the dryer. (Refer to the illustration below.)