American Dryer Corp. ML-310 - Manual (Page 10)

6
SECTION II
SPECIFICATIONS/DIMENSIONS
AND COMPONENT IDENTIFICATION
A. SPECIFICATIONS (GAS AND STEAM)
* Dryers must be provided with a clean, dry, and regulated 80 PSI +/- 10 PSI (5.51 bars +/- 0.68 bars) air supply
(equivalent volume = 9 cfh [0.25 cmh]).
NOTE: ADC reserves the right to make changes in specifications at any time without notice or
obligation.
MAXIMUM CAPACITY (DRY WEIGHT) 310 lbs 141 kg
BASKET (TUMBLER) DIAMETER 62-1/2” 158.75 cm
BASKET (TUMBLER) DEPTH 60” 152.4 cm
BASKET (TUMBLER) VOLUME 106.5 cu. ft. 3.02 cu. m.
DRIVE MOTOR 5 HP 3.73 kw
DOOR OPENING (DIAMETER) 36-3/4” w x 43” h 93.3 cm x 109.2 cm
DOOR STILL HEIGHT - LEVEL 36-1/2” 92.71 cm
COMPRESSED AIR 80 PSI 5.51 bars
COMPRESSED AIR CONNECTION 3/8” F.P.T.
VOLTAGE AVAILABLE 208-600v 3ø 3, 4w 50/60 Hz
BLOWER MOTOR 15 HP 11.25 kw
HEAT INPUT 1,125,000 btu/hr 283,500 kcal/hr
APPROX. WEIGHT (UNCRATED) 5,100 lbs 2,314 kg
AIRFLOW 6,500 cfm 184.1 cmm
INLET PIPE SIZE 1-1/2”
VOLTAGE AVAILABLE 208-600v 3ø 3, 4w 50/60 Hz
BLOWER MOTOR 25 HP 18.64 kw
APPROX. WEIGHT (UNCRATED) 5,600 lbs 2,540 kg
AIRFLOW 8,500 cfm 240.7 cmm
STEAM CONSUMPTION
BOILER HP
NORMAL LOAD
1,153 lbs/hr 524 kg/hr 55
OPERATING STEAM PRESSURE STEAM SUPPLY STEAM RETURN
125 PSI max 8.62 bars 2” 2”
Shaded areas are stated in metric equivalents
Gas*
Steam*