Network connection, Hardware installation – Akasa integral HDD external enclosure for data-storage mobility with LAN sharing User Manual
Page 6
6
Network Connection
Hardware installation
Connect INTEGRAL LAN drive to Network:
1. Connect one end of the included Ethernet cable to the Ethernet port on the INTEGRAL LAN
enclosure and the other to a switch or router. (100 Base-T).
. Make sure the power adaptor connector is firmly attached to the INTEGRAL LAN and to a power
source.
. Switch ON the INTEGRAL LAN.
Computer 1
Laptop 1
Computer 2
AC Power
Ethernet Switch
Ethernet Cable
Ethermet Switch Example
AC Power
Ethernet Cable
Wired/Wireless
Ethernet Router
Computer 1
Laptop 1
Wireless
Laptop 2
Ethernet Router Setup Example
INTEGRAL LAN
INTEGRAL LAN