Akasa integral HDD external enclosure for data-storage mobility with LAN sharing - Manual (Page 11)

4.
The Registration Wizard will check your NDAS
device status and detect your new INTEGRAL
LAN drive (i
f it has been connected and
switched on). Choose how you want to
mount the device and press Next.
•
Read/Write mode mounts device to read
and write.
•
Read Only mode mounts device to read
only.
•
Don’t Mount: device is le f t not
connected.
NOTE: If you haven’t entered the KEY the
Write/Read mode is disabled.
5.
A f ter f irst time registration the “Found New
Hardware Wizard” may appear. Select “No, not
this time” and click Next to continue.
6.
Select “Install the so f tware automatically” and
click Next to continue.
7.
I f the Windows Logo Testing message appears,
click Yes or Continue Anyway to continue the
installation.
Network Connection
11