Integral lan registration and mounting – Akasa integral HDD external enclosure for data-storage mobility with LAN sharing User Manual
Page 10

10
INTEGRAL LAN Registration and mounting
A
f
ter installing the so
f
tware, you need to register your INTEGRAL LAN i
f
you are using new Integral drive
in Network Mode. The steps below will guide you through the Registration Wizard which will help detect
your new device.
NOTE:
Connect the INTEGRAL LAN to network and turn it on be
f
ore continuing.
2.
Enter a chosen name
f
or this device and
press Next to continue.
3.
Enter your Iintegral LAN ID and KEY (see step 2
o
f
Hard disk installation). Click next to continue.
NOTE:
A key is needed to write to this NDAS
device. I
f
the Write key is not provided, users o
f
this system are restricted to Read Only
f
rom this
device.
1.
Click on the NDAS Device Management Icon
located on the system tray and select “Register a
New Device”. The “NDAS registration Wizard”
will appear. Select NEXT to contiunue.
Network Connection