Akasa integral HDD external enclosure for data-storage mobility with LAN sharing User Manual
Hdd external enclosure
Table of contents
Document Outline
- 10.
- 11.
- NOTE: When registering the INTEGRAL LAN for second time or registering another
- NDAS Device Management
- NDAS Bind Management (Advance user only)
- WARNING :
- The Bind Management Window
- Bind: Used for Aggregation, RAID 0, and RAID 1
- Unbind: Used to Unbind your Bound INTEGRAL LAN
- Tools: There are two different functions in Tools:
- Refresh: Used to refresh status of the INTEGRAL LAN
- Binding two or more INTEGRAL LAN
- 1. Before INTEGRAL LAN can be Bound, they must be in Connected Mode (white icon in
- 2. To start Bind Management software you need to go
- 3. Click the Bind button.
- 4. Choose a binding type and number of disks to
- 5. Move the chosen NDAS devices from the left
- 6. Two warning messages will appear:
- 7. Your NDAS Devices should now be bound. Go to the NDAS Device Management and
- 8. Found New Hardware Wizard may appear. Click Next and proceed in finishing the wizard.
- 9. Before Bound NDAS device can be used, it must be formatted. Please go to "HOW TO PARTITION
- Unbinding INTEGRAL LAN's
- Bind Tools:
- USB Mode Connection