Bosch TES50251DE VeroCafe Kaffeevollautomat silber - Manual (Page 38)

34
Robert Bosch Hausgeräte GmbH
34 en
Cleaning
Duration: approx. 10 minutes.
Important: Clean the brewing unit before
starting the service programme, see chapter
“Cleaning the brewing unit”.
If the message Clean required! appears
on the display, press the
e
off / j button
(12) for 3 seconds and then press the start
button (10).
The cleaning programme will start.
To clean the appliance before being
prompted, press the
e
off / j button (12) for
at least 3 seconds. Then press the
e
off / j
button (12) briefly twice. Turn the upper
rotary knob (14) until Start cleaning
appears in the display.
To start the cleaning procedure, press the
start button (10).
The display will guide you through the
programme.
Empty drip tray
Insert drip tray
● Empty drip tray (8) and replace them.
Cleaning in progress
The appliance rinses twice.
Open drawer
● Open the drawer (4).
Fill cleaner
● Drop a Bosch cleaning tablet in the
drawer (4) and close.
Cleaning in progress
The cleaning pro gramme will now run for
about 8 minutes.
Empty drip tray
Insert drip tray
● Empty drip tray (8) and replace them.
The appliance has finished cleaning is
ready for use again.
Calc‘n‘Clean
Duration: approx. 35 minutes.
Calc‘n‘Clean combines the separate func­
tions of descaling and cleaning. If both
programmes are due to be run soon, the
espresso machine automatically suggests
this service programme.
Important: If there is a filter in the water
tank (16), it needs to be removed before
the service programme is run. Clean the
brewing unit before starting the service pro­
gramme, see chapter “Cleaning the brewing
unit”.
If the message Calc‘n‘Clean required!
appears on the display, press the
e
off / j
button (12) for 3 seconds and then press
the start button (10). The service pro­
gramme will start.
To run Calc‘n‘Clean before being prompted,
press the
e
off / j button (12) for at least
3 seconds.
Then press the
e
off / j button (12) briefly
twice. Turn the upper rotary knob (14) until
Start Calc‘n‘Clean appears in the
display. To start Calc‘n‘Clean, press the start
button (10).
The display will guide you through the
programme.
Empty drip tray
Insert drip tray
● Empty drip tray (8) and replace them.
Calc‘n‘Clean in progress
The appliance rinses twice.
Open drawer
● Open the drawer (4).
Fill cleaner
● Drop a Bosch cleaning tablet in the
drawer (4) and close.
TES502_1DE.indb 34 21.02.2013 13:21:48