beautypg.com

Water fi lter, Shut off, No / old fi lter – Bosch TES50251DE VeroCafe Kaffeevollautomat silber User Manual

Page 29: Activate fi lter, Change fi lter, Fi lter, No / old

background image

25

TES502 | 02/2013

25

en

The appliance heats up and rinses. Some

water will run out of the coffee outlet.

When the drink selection menu is shown in

the display, the appliance is ready for use.

Switching off the appliance

If the appliance has not been used for

an hour, it rinses automatically and then

switches off (time span can be programmed,

see “Menu settings”

Shut off

on page 26).

Exception: The appliance switches off

without rinsing if only hot water or steam

were dispensed.

To switch the appliance off manually before

this, press the

e

off /

j

button (12). The

appliance rinses and switches off.

N.B.: If the appliance is being used for the

fi rst time, a service program has been run,

or the appliance has not been operated

for a long period, the fi rst beverage will

not have the full aroma and should not be

consumed.

When using the espresso machine for the

fi rst time, you will achieve a suitably thick

and stable “crema” only after the fi rst few

cups have been dispensed.

After extended use, water droplets may

form on the ventilation slots. This is normal.

Water fi lter

A water fi lter can prevent scale buildup.

Before a new water fi lter is used, it must be

rinsed. To do this, proceed as follows:

1. Press the water fi lter fi rmly into the

water tank with the aid of the measuring

spoon (18).

2. Fill the water tank (16) with water up to

the

max mark.

3. Press and hold the

e

off /

j

button (12)

for at least three seconds. The menu

opens.

4. Press the

e

off /

j

button (12)

repeatedly until the display shows

No / Old fi lter

.

5. Select

Activate fi lter

with the upper

rotary knob (14).

6. Press the

start button (10).

7. Place a receptacle with a capacity of

0.5 litres under the outlet.

8. Press the

start button (10).

9. Pull the milk frother (6) to open it.

10. Water will now fl ow through the fi lter to

rinse it.

11. Push the milk frother (6) in to close it.

12. Empty the container.

The appliance is ready to use once more.

Note: Rinsing the fi lter simultaneously acti­

vates the setting for the

Change fi lter!

display.

The fi lter is no longer effective when the

Change fi lter!

display appears, or at

the latest after 2 months. It needs to be

replaced for reasons of hygiene and so that

there is no build­up of limescale (this could

damage the appliance).

Replacement fi lters can be obtained from

retailers (TCZ7003) or from customer

service (467873). If no new fi lter is used,

turn the

fi lter

setting to

No / Old

.

TES502_1DE.indb 25

21.02.2013 13:21:42