Alpine DVA-7996 - Manual (Page 44)

42
-EN
DVD Default Settings (SETUP)
1
5 6
4
3
2
7 8 9 p q
AUDIO ANGLE REPEAT
ENTER
MENU
RETURN
TITLE SUB T.
w
AUDIO ANGLE REPEAT
ENTER
MENU
RETURN
TITLE SUB T.
1
Rear DVD Button (page 34)
Change the setting of the rear DVD function.
Press and hold for at least 2 seconds to switch the
remote control sensor.
2
Button (pages 30, 31)
Pause/Playback
3
DN Button (pages 30)
•
Move to the desired position on the disc.
•
During playback, press and hold for more than 1 second
to reverse the disc at double speed. Hold for more than 5
seconds to reverse the disc at 8 times the normal speed.
4
UP Button (pages 30, 31)
•
Move to the desired position on the disc.
•
During playback, press and hold for more than 1 second
to forward the disc at double speed. Hold for more than 5
seconds to forward the disc at 8 times the normal speed.
•
When pressed and held in while in the pause mode,
the disc is played in slow motion at 1/8th the normal
speed. When held in for 5 more seconds, the slow
motion speed switches to 1/2 the normal speed.
•
The picture is forwarded by one frame each time the
button is pressed in the pause mode.
5
F Button
The DVD/video CD indicator upper level/lower level
mode operation switches each time the button is
pressed.
6
1 Button
•
In DVD mode
Indicator upper row ( ) : Selects the item displayed
on the screen (left direction).
Indicator lower row (AUDIO) : Switches the audio tracks.
(page 32)
•
In Video CD mode
Indicator upper row ( ) : Cannot be used.
Indicator lower row (AUDIO) : Switches the audio tracks.
(page 32)
7
2 Button
•
In DVD mode
Indicator upper row ( ) : Selects the item displayed on
the screen (right direction).
•
Indicator lower row (SUB T.) : Switches the subtitle. (page
33)
•
In Video CD mode
Indicator upper row ( ) : Cannot be used.
Indicator lower row (SUB T.) : Cannot be used.
8
3 Button
•
In DVD mode
Indicator upper row ( ) : Selects the item displayed on
the screen (upper direction).
Indicator lower row (ANGLE) : Switches the angle of the
picture. (page 32)
•
In Video CD mode
Indicator upper row ( ) : Cannot be used.
Indicator lower row (ANGLE) : Cannot be used.
9
4 Button
•
In DVD mode
Indicator upper row ( ) : Selects the item displayed
on the screen (lower direction).
Indicator lower row (REPEAT) : Repeats playback. (page
31)
•
In Video CD mode
Indicator upper row ( ) : Cannot be used.
Indicator lower row (REPEAT) : Repeats playback. (Only
when PBC is OFF) (page 31)
p
5 Button
•
In DVD mode
Indicator upper row (ENTER) : Selects the item
displayed on the screen.
Indicator lower row (MENU) : Displays the DVD
menu.
•
In Video CD mode
Indicator upper row (ENTER) : Cannot be used.
Indicator lower row (MENU) : PBC ON/OFF switch (Only
Video CD with PBC function)
q
6 Button
•
In DVD mode
Indicator upper row (RETURN) : Returns to the
previous selection screen.
Indicator lower row (TITLE) : Displays the title
menu.
•
In Video CD mode
Indicator upper row (RETURN) : Returns to the
previous selection screen. (Only when PBC is ON)
Indicator lower row (TITLE) : Cannot be used.
w
DVD/Video CD Indicator
The DVD or Video CD playback Indicator lights.
•
Indicator upper row
The same operation as the upper level indicator
operation (remote control unit and joystick, ENTER and
RETURN) can be performed by pressing “F” button once
while playing a DVD then pressing “1” to “6” button. When
playing a video CD, however (when PBC is turned on),
only the RETURN operation is possible.
•
Indicator lower row
The lower level indicator operation can be performed by
pressing “1” to “6” button while playing a DVD/video CD.
When playing a video CD, however, only the AUDIO,
MENU (for Video CDs with PBC functions) and REPEAT
(only when PBC is turned off) operations are possible.
NOTE
You may not be able to operate according to the disc.
Operating DVDs and video CDs using the front panel