Xm radio operation, Checking the xm radio id number – Alpine DVA-7996 User Manual
Page 29

27
-EN
XM Radio Operation
Checking the XM Radio ID Number
You need to provide XM with the unique XM Radio ID
number for your XM Radio Receiver in order to
subscribe to XM's programming.
This number is an 8 character alphanumeric number
that is printed on a label directly on the XM Receiver.
It can also be displayed on the screen of the DVA-7996
in the following way.
1
While receiving XM1/XM2, press the
DN or
UP
button to select channel “0.”
2
The unit alternately displays “RADIO ID” for 2 seconds,
then the ID number for 10 seconds.
3
To cancel the ID number display, set the channel to
other than “0.”
There is another way to display your ID number.
1. Press and hold the SETUP button for at least 3
seconds.
2. Press the
DN
or
UP button repeatedly
to select “ID.”
3. Press the BAND button to display your ID
number.
4. After checking your ID number, press the
SETUP button to return to the normal display.
NOTES
• You cannot use “O,” “S,” “ I,” or “F” for the ID Number.
• You can check your ID number printed on the label on the
package of your XM Satellite Radio Receiver (TUA-T020XM).
DN
UP
BAND
SOURCE
SETUP
Receiving XM Channels with the XM
Receiver (Optional)
XM Satellite Radio* is the next generation of audio
entertainment, with up to 100 brand-new digital
channels. For a small monthly fee, subscribers can hear
crystal-clear music, sports, news and talk, coast-to-
coast via satellite. For more information, visit XM’s
website at
www.xmradio.com
or call 1-800-852-9696.
An optional XM Satellite Radio Receiver (TUA-T020XM)
may be connected to the DVA-7996. With an XM
Receiver connected to the Ai-NET input of the DVA-
7996, the XM Receiver will be controllable from the
DVA-7996.
* XM and its corresponding logos are trademarks of XM
Satellite Radio Inc.
NOTES
• The controls on the DVA-7996 for XM Receiver
operation are operative only when an XM Receiver is
connected.
• The XM1 or XM2 band illuminates when in XM mode.
1
Press the SOURCE button to select RADIO Mode.
2
Press the BAND button to select XM1 or XM2.
Each press changes the band:
3
Press the
DN or
UP button to select the
desired channel. Holding the
DN or
UP buttons
will change channels continuously.
Tips
FM1
FM2
XM1
XM2
AM