Alpine DVA-7996 - Manual (Page 23)

21
-EN
Repeat Play
1
Press the REPEAT button to play back repeatedly the
track being played.
The track will be played repeatedly.
Press the REPEAT button again and select OFF to
deactivate the repeat play.
NOTES
•
If a CD Changer is connected and the RPT ALL mode is
selected, the unit repeatedly plays back all tracks on the disc
selected.
•
In case a 6-disc CD changer is connected:
In CD changer mode, press the “F” button to illuminate the
“FUNC” indicator and go to step 1 within 5 seconds.
•
In case a 12-disc CD changer is connected:
In changer mode, press the “F” button twice to illuminate the
“FUNC” indicator and go to step 1 within 5 seconds.
M.I.X. (Random Play)
1
Press the M.I.X. button in the play or pause mode.
The tracks on the disc will be played back in a random
sequence.
To cancel M.I.X. play, press the M.I.X. button again to
turn off the M.I.X.
NOTES
•
If a CD Changer equipped with the ALL M.I.X. function is
connected, ALL M.I.X. will also be selectable.
In this mode, the tracks on all the CDs in the current
magazine will be included in the random playback sequence.
•
In case a 6-disc CD changer is connected:
In CD changer mode, press the “F” button to illuminate the
“FUNC” indicator and go to step 1 within 5 seconds.
•
In case a 12-disc CD changer is connected:
In CD changer mode, press the “F” button twice to illuminate
the “FUNC” indicator and go to step 1 within 5 seconds.
Scanning Programs
1
Press the SCAN button to activate the Scan mode.
The first 10 seconds of each track will be played back
in succession.
To stop scanning, press the SCAN button and
deactivate the Scan mode.
NOTES
•
In case a 6-disc CD changer is connected:
In CD changer mode, press the “F” button to illuminate the
“FUNC” indicator and go to step 1 within 5 seconds.
•
In case a 12-disc CD changer is connected:
In CD changer mode, press the “F” button twice to illuminate
the “FUNC” indicator and go to step 1 within 5 seconds.
Controlling CD Changer (Optional)
An optional 6-disc or 12-disc CD Changer may be
connected to the DVA-7996 if it is Ai-NET compatible.
With a CD Changer connected to the Ai-NET input of
the DVA-7996, the CD Changer will be controllable from
the DVA-7996.
Using the KCA-400C (Multi-Changer Switching device) or
the KCA-410C (Versatile Link Terminal) multiple
changers can be controlled by the DVA-7996.
See the Multi-Changer Selection section on page 22 for
selecting the CD Changers.
NOTES
•
The controls on the DVA-7996 for CD Changer operation are
operative only when a CD Changer is connected.
•
The “Changer” indicator illuminates when a CD Changer is
connected.
•
The DVD changer (optional) is controllable from the DVA-7996
as well as the CD changer.
1
Press the SOURCE button to activate the CHANGER
mode. The display shows the disc number and track
number.
NOTES
•
The source indicator varies depending on the connected
source.
•
Press the BAND button to switch the Disc mode in the CD/
DVD/Changer mode.
2
Press the Disc Select buttons (1 through 6)
corresponding to one of the discs loaded in the CD
Changer. The selected disc number appears in the
display and CD playback starts.
NOTES
•
After selecting the desired disc, you can operate in the same
way as for the DVA-7996 CD player.
For details, please see the CD Operation section.
•
If the “FUNC” indicator is illuminated the Disc Select
buttons become nonfunctional.
When a 12-disc CD Changer is connected:
To select discs numbered from 1 to 6, the procedure is
the same as for the 6-disc CD Changer. To select discs
numbered from 7 to 12, first press the “F” button. This
changes the “D” indicator to “d.” Then press the desired
Preset button. With the “F” button activated, the Preset
buttons 1 to 6 will represent discs 7 to 12 respectively.
RPT RPT ALL (off)
M.I.X. ALL M.I.X. (off)