Nova-Tech CPWplus - Manual (Page 16)

© Adam Equipment Company 2008 14
The scale can be controlled by a computer using the following
commands. The commands must be sent in upper case letters,
i.e. “
T” and not “t”. The input and output formats are as given below.
Input commands format:
Z Tares the scale to display the net weight- same as
pressing
[Tare/Zero]
H Sets the scale to hold if the hold function is enabled.
Same as pressing the
[Hold] key
N Sends the net weight to the RS-232 interface.
G Sends the gross weight to the RS-232 interface.
T
Sends the tare weight to the RS-232 interface.
Output format:
G
+ 2.00 kg
N
+ 1.00 kg