Detection functions – Nokta detectors Golden King NGR User Manual
Page 31

GOLD
6 8
3 0
METAL
MINERAL
min
max
GOLD
7 3
2 1
CAVITY
MINERAL
6 8
3 0
METAL
MINERAL
2 3
YOU DETECTED A TARGET !
PLEASE HOLD “CONFIRM” BUTTON AND PASS 
OVER THE TARGET TO GET ALL INFORMATION 
ABOUT THE TARGET.
Detection Functions
REPORT SCREEN 
The Golden King Deep Processor Radar communicates the initial data 
received from the target signal and the following steps to be performed 
through the REPORT SCREENS. The report screen not only gives information 
about the target signal, but it also guides the user regarding the system 
warnings as well as the following steps to be performed.
Like a private guide always at your side, the REPORT SCREEN will be a 
partner working together with you throughout your searches and detections, 
giving you all the information you need and checking all your actions for 
accuracy. 
GAUGE DETECTION
The Gauge option on the Golden King Deep Processor Radar system has 
been designed as a convenient detection interface, considering the users’ old 
habits about the former systems. All sections present in the general detection 
(DIGITAL DETECTION) are available here but represented by a gauge system
instead. 
METAL SECTION GAUGE
During your search, you will be able to follow all the data and information 
received from the target signal by the GAUGE DETECTION on this screen 
such as whether the metal is ferrous or non- ferrous, whether it is alloy or 
gold etc. You will follow all the information through the digital gauge on the 
screen and see the metal-mineral ratios in numbers. Again, you will be able 
to determine whether the signal received from the target underground is alloy
or not. 
GOLD
6 8
3 0
METAL
MINERAL
25
YOU DETECTED A TARGET !
PLEASE HOLD “CONFIRM” BUTTON AND PASS 
OVER THE TARGET TO GET ALL INFORMATION 
ABOUT THE TARGET.
